| About |
|---|
| RANPELEN J-595K是一种用于注塑成型的成核无规共聚物。 该等级适用于在传统注塑设备中加工，具有超强的透明度，良好的机械平衡，高光泽，成型周期短和超高流动性。 J-595K是一种“不含邻苯二甲酸盐”的产品。 |
| Product Description | |
|---|---|
| Supplier | LOTTE |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good surface appearance,Quick molding cycle |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.90 | g/cm³ | ASTM D792 |
| Melt index | 70 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 90 | ASTM D785 | |
| tensile strength | |||
| yield | 26 | Mpa | ASTM D638 |
| Tensile strain | |||
| fracture | >200 | % | ASTM D638 |
| Bending modulus | 1080 | Mpa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 32 | J/m | ASTM D256 |
| -10℃ | 22 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa | 92 | ℃ | ASTM D648 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 20 | % | ASTM D1003 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |