| About |
|---|
| A fast curing 2-component Polyurethane casting system for use in vacuum casting equipment to simulate the appearance and physical properties of a wide range of engineering thermoplastics for rapid prototyping or short series production. RenPIM® Vacuum Grade allows you to produce thermoplastic like parts without the high cost of steel moulds and press. Parts are made within minutes at low cost giving you time and cost savings. The high quality parts made from RenPIM® Vacuum Grade are dimensionally stable and accurately reproduce fine surface detail and textures. You can choose materials from a clear and concise product range at competitive prices to suit your requirements. The products are well proven, thoroughly tested and endorsed by MCP.&& |
| Product Description | |
|---|---|
| Supplier | Huntsman |
| Generic | PUR |
| Material Status | Commercial: Active |
| Features | No viscosity,Good Dimensional Stability,Elastic,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| storage stability | |||
| 40 ℃ | 5.0 to 10 | min | |
| stripping time | |||
| 70℃ | 120 | min | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Maximum Layer Thickness | 1.00 | cm | |
| Mixing ratio | 100:35 to 100:40 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 65 | ISO 868 | |
| tensile strength | |||
| fracture | 2.62 to 4.29 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 85 to 92 | % | ISO 527-2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Range: 60 to 70 A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |