| About |
|---|
| 57-11 is a suspension type PVC resin specially recommended for blow moulding / stretch blow moulding of bottles and calendaring of sheets. The grade’s combination of low molecular weight and high melt flow makes it suitable for easy processing of calendered, blow moulded and injection moulded items. Its low fish eye / low dark resin count make it suitable for transparent applications and the uniform coarseness of its grains result in easy bulk handling / optimum requirement of lubricant / more uniform fluxing in the barrel.&& |
| Product Description | |
|---|---|
| Supplier | Reliance |
| Generic | PVC homopolymer |
| Material Status | Commercial: Negative |
| Features | Excellent Processability,High liquidity,Low molecular weight,Homopolymer |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.48 to 0.54 | g/cm³ | ASTM D1895 |
| K-Value | 57.0 | ||
| Intrinsic viscosity | 0.68 | ASTM D1243 | |
| Particle size | |||
| Retention on 30 mesh | < 0.00500 | % | |
| Particle size distribution | ASTM D1921 | ||
| Retention on ASTM 40 mesh | < 0.10 | % | ASTM D1921 |
| Retention on ASTM 60 mesh | < 2.0 | % | ASTM D1921 |
| Through ASTM 140 mesh | < 50 | % | ASTM D1921 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Heat loss | < 0.30 | % | ASTM D3030 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Dark Resin（for 100 g resin） | < 4.00 | count/g | |
| Fish Eye (Blow molded Film Method) | < 10.0 | ||
| Residual Vinyl Chloride Monomer | < 2 | ppm | ASTM D3749 |
| porosity | |||
| DOP | 0.220 to 0.340 | cm³/g | ASTM D3367 |
| Flow time | < 25.0 | sec | ASTM D1895 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. @ 1% in cyclohexanone |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |