| About |
|---|
| 60-11 is a low molecular weight suspension type PVC resin suitable for blow moulding and calendering applications. It is specially recommended for BM / SBM of bottles and calendering of sheets. Its combination of low molecular weight with high melt flow makes it suitable for easy processing of calendered, blow moulded and injection moulded items. It has a low fish eye and low dark resin count which makes it suitable for transparent applications. Uniform coarseness of the grains of this resin results in easy bulk handling, optimum requirement of lubricant and more uniform fluxing in the barrel.&& |
| Product Description | |
|---|---|
| Supplier | Reliance |
| Generic | PVC homopolymer |
| Material Status | Commercial: Negative |
| Features | Excellent Processability,Low molecular weight,Homopolymer |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.49 to 0.55 | g/cm³ | ASTM D1895 |
| K-Value | 60.0 | ||
| Intrinsic viscosity | 0.75 | ASTM D1243 | |
| Particle size | |||
| Retention on ASTM 30 mesh | < 0.00500 | % | |
| Particle size distribution | ASTM D1921 | ||
| Retention on ASTM 40 mesh | < 0.10 | % | ASTM D1921 |
| Retention on ASTM 60 mesh | < 2.0 | % | ASTM D1921 |
| Through ASTM 140 mesh | < 40 | % | ASTM D1921 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Heat loss | < 0.30 | % | ASTM D3030 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Dark Resin（for 100 g resin） | < 4.00 | count/g | |
| Fish Eye (Blow molded Film Method) | < 10.0 | ||
| Residual Vinyl Chloride Monomer | < 2 | ppm | ASTM D3749 |
| porosity | |||
| DOP | 0.220 to 0.340 | cm³/g | ASTM D3367 |
| Flow time | < 25.0 | sec | ASTM D1895 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. @ 1% in cyclohexanone |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |