Resblend PA/ABS

About
Resblend PA/ABS is a Polyamide 6 + ABS (Nylon 6+ABS) product. It is available in Europe.&&

Product Description
Generic	PA 6+ABS
Material Status	Commercial: Active
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.09-1.11	g/cm³

MECHANICAL	Nominal value	Unit	Test method
tensile strength	42.0-56.0	MPa	ISO 527-2
Tensile strain
fracture	10-20	%	ISO 527-2
Tensile modulus	2100-2300	MPa	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	7-10	kJ/m²	ISO 179/1A

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80-85	°C
Drying time	4	hr
Injection temperature	220-260	°C
Mold temperature	50-90	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.