Resiten® C - SOLIAO

About
Resiten® C is a Phenolic material. It is available in North America. Important attributes of Resiten® C are: Flame Rated REACH Compliant RoHS Compliant&&

MECHANICAL	Nominal value	Unit	Test method
tensile strength			ASTM D638
MD，1.57 mm	79.3	MPa	ASTM D638
TD，1.57 mm	44.8	MPa	ASTM D638
MD，3.18 mm	85.5	MPa	ASTM D638
TD，3.18 mm	52.4	MPa	ASTM D638
bending strength			ASTM D790
1.57 mm	169	MPa	ASTM D790
1.57 mm	114	MPa	ASTM D790
3.18 mm	146	MPa	ASTM D790
3.18 mm	105	MPa	ASTM D790
12.70 mm	138	MPa	ASTM D790
12.70 mm	93.8	MPa	ASTM D790
compressive strength			ASTM D695
1.57 mm	46.4	MPa	ASTM D695
1.57 mm	45.7	MPa	ASTM D695
1.57 mm	> 310	MPa	ASTM D695
3.18 mm	153	MPa	ASTM D695
3.18 mm	143	MPa	ASTM D695
3.18 mm	> 310	MPa	ASTM D695
12.7 mm	213	MPa	ASTM D695
12.7 mm	194	MPa	ASTM D695
12.7 mm	> 310	MPa	ASTM D695

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
TD，1.57mm	94	J/m	ASTM D256
TD，3.2mm	90	J/m	ASTM D256
TD，12.7mm	69	J/m	ASTM D256
Flow rate, 1.57mm	150	J/m	ASTM D256
Flow rate, 3.18mm	140	J/m	ASTM D256
Flow rate, 12.7mm	130	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Relative temperature index
Electrical performance, 1.60 mm	115	℃	UL 746
1.60 mm	125	℃	UL 746

Electrical performance	Nominal value	Unit	Test method
Dielectric strength			ASTM D149
1.57 mm	15	kV/mm	ASTM D149
3.18 mm	9.0	kV/mm	ASTM D149
Dielectric constant			ASTM D150
1.57 mm，1 kHz	6.71		ASTM D150
1.57 mm，1 MHz	4.59		ASTM D150
3.18 mm，1 kHz	8.27		ASTM D150
3.18 mm，1 MHz	5.32		ASTM D150
Dissipation factor			ASTM D150
1.57 mm，1 kHz	0.17		ASTM D150
1.57 mm，1 MHz	0.053		ASTM D150
3.18 mm，1 kHz	0.22		ASTM D150
3.18 mm，1 MHz	0.064		ASTM D150
Arc resistance			ASTM D495
1.57 mm	47.0	sec	ASTM D495
3.18 mm	38.0	sec	ASTM D495
12.7 mm	47.0	sec	ASTM D495
High Arc Burning Index (HAI) (1.45 mm)	6.70		UL 746
High voltage arc marking rate (HVTR) (1.45 mm)	10.6	mm/min	UL 746
Hot wire ignition (HWI) (1.45 mm)	9.3	sec	UL 746
breakdown voltage			ASTM D149
1.57 mm	50000	V	ASTM D149
3.18 mm	43000	V	ASTM D149
1.27 cm	33000	V	ASTM D149

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level		UL 94
1.60 mm	HB	UL 94
3.20 mm	HB	UL 94
12.70 mm	HB	UL 94

Supplementary information	Nominal value	Unit	Test method
Bond Strength（1.27 cm）	1.0E+6	g	ASTM D229

Notes
1. Typical properties: these are not to be construed as specifications.
2. .500 inches
3. Across Flow, Condition A
4. Flow, Condition A
5. Flatwise
6. Across Flow
7. Flow
8. Condition A
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.