| About |
|---|
| Reslen REF 600 is a Low Density Polyethylene + EVA product. It is available in Europe. Primary characteristic: flame retardant.&& |
| Product Description | |
|---|---|
| Generic | LDPE+EVA |
| Material Status | Commercial: Active |
| Features | Flame Characteristics |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.51 to 1.55 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 8.0 to 12 | g/10min | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 190 to 300 | MPa | ISO 527-2 |
| tensile strength | 11.0 to 15.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 50 to 150 | % | ISO 527-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | > 40 | kJ/m² | ISO 179/1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 70.0 | ℃ | ISO 306/A120 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 to 100 | °C | |
| Drying time | 3.0 | hr | |
| Processing (melt) temperature | 170 to 190 | °C | |
| Mold temperature | 40 to 90 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |