ResMart Ultra HoPP 20 Adds

About
Prime Homopolymer Polypropylene with nuc and antistat additives that provides a good balance of properties with good melt flow&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good liquidity,Homopolymer
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.898	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	20	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	27	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	107	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	112		ASTM D785
tensile strength	37.9	MPa	ASTM D638
Tensile strain
yield	7.5	%	ASTM D638
Bending modulus	1590	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	79	°C
Drying time – hot air dryer	2.0	hr
Processing (melt) temperature	191 to 232	°C
Mold temperature	32 to 66	°C
Injection pressure	68.9 to 103	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.