ResMart Ultra PC HF

About
High performance high flow polycarbonate water white&&

Product Description
Generic	Polycarbonate
Material Status	Commercial: Active
Features	High liquidity,V-2
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ASTM D792
Melt Flow Rate	22	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength	62.1	MPa	ASTM D638
Bending modulus	2310	MPa	ASTM D790
bending strength	91.7	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	590	J/m	ASTM D256
Notched impact strength of cantilever beam	无断裂		ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	125	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-2		UL 94

optical performance	Nominal value	Unit	Test method
Transmittance	90.0	%	ASTM D1003

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	116 to 121	°C
Drying time – hot air dryer	4.0	hr
Recommended maximum moisture content	0.20	%
Processing (melt) temperature	288 to 316	°C
Mold temperature	82 to 121	°C
Injection pressure	68.9 to 103	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.