REVODE 101 - SOLIAO

About
Hisun Biomaterials PLA polymer REVODE101 is a thermoplastic resin derived from annually renewable resources and is specifically designed for sheet extrusion applications. Many products can be produced from REVODE101, and the application field of this resin is extended gradually. Suitable products including: cold drink cup, fruit container, salad plate, fruit plate, egg tray, electronics tray, IC card, cup lid or cake lid and etc.&&

About

Hisun Biomaterials PLA polymer REVODE101 is a thermoplastic resin derived from annually renewable resources and is specifically designed for sheet extrusion applications. Many products can be produced from REVODE101, and the application field of this resin is extended gradually. Suitable products including: cold drink cup, fruit container, salad plate, fruit plate, egg tray, electronics tray, IC card, cup lid or cake lid and etc.&&

Product Description
Supplier	Hisun Biomaterials
Material Status	Commercial: Active
Features	Renewable resources
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20-1.30	g/cm³	GB/T1033.1-2008
Melt Flow Rate
190℃，2.16kg	2-12	g/10min	GB/T3682.1-2018

MECHANICAL	Nominal value	Unit	Test method
Tensile Strength	45	MPa	GB/T1040.1-2018
Elongation at Break	2.5	%	GB/T1040.1-2018

IMPACT	Nominal value	Unit	Test method
Izod Impact Strength of Cantilever Beam Notch	1.0	kJ/m²	GB/T1843-2008

THERMAL	Nominal value	Unit	Test method
Glass Transition Temperature	56-61	℃	GB/T19466.2-2004
Melting Point	<155	℃	GB/T19466.3-2004

Process Conditions
Extrusion Molded	Nominal value	Unit	Test method
Drying temperature	90	°C
Drying time	2.0 to 3.0	hr
Barrel Zone Temperature	20 to 40	°C
Barrel Zone 1 Temperature	180 to 200	°C
Barrel Zone 2 Temperature	180 to 200	°C
Barrel Zone 3 Temperature	180 to 200	°C
Barrel – Zone 4 Temperature	180 to 200	°C
Barrel Zone 5 Temperature	180 to 190	°C
Die temperature	180 to 190	°C
Pull roll	25 to 45	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.