| About |
|---|
| Hisun PLA—REVODE190 is a thermoplastic resin derived from annually renewable resources&& |
| Product Description | |
|---|---|
| Supplier | Hisun Biomaterials |
| Material Status | Commercial: Active |
| Features | Renewable resources |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20-1.30 | g/cm³ | GB/T1033.1-2008 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2-12 | g/10min | GB/T3682.1-2018 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | 45 | MPa | GB/T1040.1-2018 |
| Elongation at Break | 2.5 | % | GB/T1040.1-2018 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Impact Strength of Cantilever Beam Notch | 1.0 | kJ/m² | GB/T1843-2008 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass Transition Temperature | 59-63 | ℃ | GB/T19466.2-2004 |
| Melting Point | ≥170 | ℃ | GB/T19466.3-2004 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |