| About |
|---|
| Hisun Biomaterials PLA polymer REVODE201 is a thermoplastic resin derived from annually renewable resources and is specifically designed for injection molding applications. Many products can be produced from REVODE201, such as transparent or opaque tableware, stationary, toys, gardening tools, outdoor products and etc. The application field of this resin is extended gradually.&& |
| Product Description | |
|---|---|
| Supplier | Hisun Biomaterials |
| Material Status | Commercial: Active |
| Features | Renewable resources |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20-1.30 | g/cm³ | GB/T1033.1-2008 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 12-40 | g/10min | GB/T3682.1-2018 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | 45 | MPa | GB/T1040.1-2018 |
| Elongation at Break | 2.5 | % | GB/T1040.1-2018 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Impact Strength of Cantilever Beam Notch | 1.0 | kJ/m² | GB/T1843-2008 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass Transition Temperature | 56-61 | ℃ | GB/T19466.2-2004 |
| Melting Point | <160 | ℃ | GB/T19466.3-2004 |
| Process Conditions | |||
|---|---|---|---|
| Injection Molding | Nominal value | Unit | Test method |
| Drying Temperature | 70 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Dew Point | -40 | °C | |
| Hopper Temperature | 20 to 40 | °C | |
| Rear Temperature Zone 1 | 190 to 210 | °C | |
| Middle Temperature Zone 2 | 180 to 200 | °C | |
| Front Temperature Zone 3 | 180 to 200 | °C | |
| Nozzle Temperature | 180 to 200 | °C | |
| Mold Temperature | 20 to 30 | °C | |
| Back Pressure | 0.689 to 2.07 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |