| About |
|---|
| Revolve M-594 is a fully formulated rotational moulding foam grade which has been designed to give a closed cell, rigid foam. Suitable for use in single, double and triple layer applications. (please contact your Matrix representative for processing guidelines)&& |
| Product Description | |
|---|---|
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Foaming performance |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.150 | g/cm³ | ISO 1183 |
| Melt Flow Rate | 5.0 | g/10min | ISO 1133 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Foamed |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |