| About |
|---|
| Rhelon F2038H-01 is a Polyamide 66 (Nylon 66) product filled with glassmineral. It can be processed by injection molding and is available in North America. Primary characteristic: heat stabilizer.&& |
| Product Description | |
|---|---|
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | Heat Stabilized |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.45 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 0.20 to 0.45 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 121 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 3.0 | % | ASTM D638 |
| yield | 3.0 | % | ASTM D638 |
| Bending modulus | 8690 | MPa | ASTM D790 |
| bending strength | 165 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 48 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 252 | ℃ | ASTM D648 |
| Melting peak temperature | 255 | ℃ | ASTM D789 |
| Linear coefficient of thermal expansion | |||
| MD | 5.5E-6 | 1/℃ | ASTM D696 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 79 | °C | |
| Recommended maximum moisture content | 0.20 | % | |
| Proposed maximum recycled material ratio | 20 | % | |
| Barrel rear temperature | 257 to 268 | °C | |
| Barrel middle temperature | 268 to 279 | °C | |
| Barrel front temperature | 274 to 285 | °C | |
| Nozzle temperature | 274 to 285 | °C | |
| Processing (melt) temperature | 257 to 271 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |