Rhelon G3533H-01

About
Rhelon G3533H-01 is a Polyamide 66/6 Copolymer (Nylon 66/6) product filled with 33% glass fiber. It can be processed by injection molding and is available in North America. Primary characteristic: heat stabilizer.&&

Product Description
Generic	PA66/6
Material Status	Commercial: Active
Features	Heat Stabilized
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.38	g/cm³	ASTM D792
Shrinkage rate
MD	0.15 to 0.40	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength	134	MPa	ASTM D638
Tensile strain
fracture	1.5	%	ASTM D638
yield	1.5	%	ASTM D638
Bending modulus	7580	MPa	ASTM D790
bending strength	228	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	59	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	243	℃	ASTM D648
Melting peak temperature	249	℃	ASTM D789

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	79	°C
Recommended maximum moisture content	0.20	%
Proposed maximum recycled material ratio	25	%
Barrel rear temperature	246 to 257	°C
Barrel middle temperature	263 to 274	°C
Barrel front temperature	268 to 282	°C
Nozzle temperature	268 to 282	°C
Processing (melt) temperature	263 to 282	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.