| About |
|---|
| Riblene GM 20 is a medium fluidity low density polyethylene resin (LDPE). Main Application Riblene GM 20 is suitable for coating applications where a low neck-in is required. Moreover, for its rheological properties, Riblene GM 20 can be used for injection moulded high thickness articles, caps, closures, stoppers and houseware.&& |
| Product Description | |
|---|---|
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Low shrinkage,Food contact compliance,Low density,Moderate liquidity |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 3.5 | g/10min | ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -75.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 89.0 | ℃ | ISO 306/A |
| Melting temperature | 111 | ℃ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, injection molding | 47 | ISO 868 | |
| tensile strength | ISO 527-2 | ||
| Yield, injection molding | 10.0 | MPa | |
| Fracture, injection molding | 12.0 | MPa | |
| Tensile strain | |||
| Fracture, injection molding | 520 | % | ISO 527-2 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 260 to 330 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |