| About |
|---|
| RIGIDEX® HD5226EA is a high density polyethylene copolymer with a narrow molecular weight distribution, suitable for thin wall injection moulding and fast cycling applications. Benefits & Features High flow Low warpage Slip agent free grade Applications Caps & closures – non beverages Beverage over-caps Thin-walled containers&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | HDPE copolymer |
| Material Status | Commercial: Active |
| Features | High liquidity,High elastic,Quick molding cycle,Weight distribution,Copolymer,High density |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.953 | g/cm³ | ISO 1872 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 26 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 23 ℃ | 8.00 | hr | ASTM D1693 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1150 | MPa | ISO 527-2/1B |
| tensile strength | |||
| yield | 26.0 | MPa | ISO 527-2/1B |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | 2.5 | kJ/m² | ISO 179 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |