| About |
|---|
| Rigidex® HD5502S is a medium molecular weight copolymer grade supplied in pellet form which has an optimum balance of properties for use in a wide range of blow moulding and extrusion applications including bottles. Benefits & Features Easy processing Good rigidity Good environmental stress cracking resistance Good impact strength Applications Blow moulded containers up to 30 liters capacity for packaging chemicals, many household products, oils and foodstuff Sheet Extruded net&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | MMW-HDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High impact resistance,Copolymer,High density,High ESCR |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.954 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.20 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 50 ℃，BTT，F50 | 50.0 | hr | ASTM D1693 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 23 ℃ | 26.0 | MPa | ISO 527-2/2 |
| Tensile strain | |||
| Fracture, 23 ℃ | > 300 | % | ISO 527-2/2 |
| Bending modulus | |||
| 23℃ | 1050 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | 12 | kJ/m² | ISO 179 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Bottle Stress Crack Resistance | 6.0 | hr | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Speed D |
| 3. 3.9 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |