Rigidex® HD5802BM

About
Rigidex® HD5802BM is a new bimodal medium molecular weight copolymer grade supplied in pellet form. It has an outstanding stiffness and environmental stress crack resistance (ESCR) balance making it ideal for use in a wide range of blow moulding applications. The grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction. Typical applications Blow moulded containers up to 10 litres capacity for packaging chemicals, many household products, oils and foodstuffs Sheet extrusion Benefits and Features High rigidity Outstanding environmental stress cracking resistance High impact strength Easy processing&&

About

Rigidex® HD5802BM is a new bimodal medium molecular weight copolymer grade supplied in pellet form. It has an outstanding stiffness and environmental stress crack resistance (ESCR) balance making it ideal for use in a wide range of blow moulding applications. The grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction. Typical applications Blow moulded containers up to 10 litres capacity for packaging chemicals, many household products, oils and foodstuffs Sheet extrusion Benefits and Features High rigidity Outstanding environmental stress cracking resistance High impact strength Easy processing&&

Product Description
Supplier	INEOS
Generic	MMW-HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Copolymer,High density,High ESCR
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.958	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	0.30	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)
50 ℃，F50	> 200	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, 23 ℃	28.0	MPa	ISO 527-2/2/100
Tensile strain
Fracture, 23 ℃	> 300	%	ISO 527-2/2/100
Bending modulus
23℃	1200	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	12	kJ/m²	ISO 179

Notes
1. Typical properties: these are not to be construed as specifications.
2. 100% Concentration, BTT
3. 3.9 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.