| About |
|---|
| Rigidex® HM5060XA is a high molecular weight grade supplied with an optimum blend of properties for the production of medium-large blow moulded articles. Typical applications High performance blow moulded containers typically 5-150 litres capacity for packaging aggressive products, especially where approvals are required to UN recommendations for Dangerous Goods and RID/ADR Compatibility testing Benefits and Features Enhanced environmental stress crack resistance Very high chemical resistance High impact strength Good rigidity Excellent processability on a wide range of blow moulding equipment&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | HMW-HDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High impact resistance,High molecular weight,High density,Solvent resistance,High ESCR |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.950 | g/cm³ | ISO 1872 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 6.0 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | ASTM D1693A | ||
| 50 ℃，10%Adinol | 500 | hr | ASTM D1693A |
| 50 ℃，100%Adinol | > 1000 | hr | ASTM D1693A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 23 ℃ | 26.0 | MPa | ISO 527-2/2 |
| Tensile strain | |||
| Fracture, 23 ℃ | > 500 | % | ISO 527-2/2 |
| Bending modulus | |||
| 23℃ | 1000 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | No Break | ISO 179 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Bottle Stress Crack Resistance（60℃） | 8.3 | day | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Speed D |
| 3. 3.9 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |