| About |
|---|
| Rigidex® HM5411EA is a high molecular weight copolymer grade supplied in pellet form for medium and large blow moulding applications where a combination of high environmental stress cracking resistance and good rigidity is required. Typical applications High performance blow moulded containers typically of 1-60 litres capacity for packaging aggressive products Robust industrial and technical mouldings Benefits and Features Very high environmental stress crack resistance Good rigidity High melt strength High impact strength&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | HMW-HDPE |
| Material Status | Commercial: Active |
| Features | High impact resistance,High molecular weight,Good melt strength,Copolymer,High density,High ESCR |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.952 | g/cm³ | ISO 1872 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 10 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | ASTM D1693A | ||
| 50 ℃，10%Adinol | 130 | hr | ASTM D1693A |
| 50 ℃，100%Adinol | > 1000 | hr | ASTM D1693A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 23 ℃ | 26.0 | MPa | ISO 527-2/2 |
| Tensile strain | |||
| Fracture, 23 ℃ | > 300 | % | ISO 527-2/2 |
| Bending modulus | |||
| 23℃ | 1100 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | 23 | kJ/m² | ISO 179 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Bottle Stress Crack Resistance（60℃） | 2.1 | day | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Speed D |
| 3. 3.9 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |