| About |
|---|
| Rilsan® BMNO P40是一种聚酰胺 11（尼龙 11）产品,。 它可以通过注射成型进行加工,在亚太地区、北美洲、拉丁美洲、欧洲或非洲和中东有供货。 特性包括: 中等粘度 增塑 环保/绿色&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PA 11 |
| Material Status | Commercial: Active |
| Features | Renewable resources,Plasticizing |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| saturated | 1.1 | % | ASTM D570 |
| 24hr | 0.30 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -40℃ | 21 | J/m | ASTM D256 |
| 23℃ | 320 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 41.1 | ℃ | ASTM D648 |
| Melting temperature | 186 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 64.1 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 430 | % | ASTM D638 |
| Bending modulus | 338 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 78 | ASTM D785 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 66 to 79 | °C | |
| Drying time | 3.0 to 4.0 | hr | |
| Proposed maximum recycled material ratio | 20 | % | |
| Barrel rear temperature | 199 | °C | |
| Barrel middle temperature | 210 | °C | |
| Barrel front temperature | 221 | °C | |
| Nozzle temperature | 221 | °C | |
| Mold temperature | 27 to 66 | °C | |
| Injection pressure | 34.5 to 68.9 | MPa | |
| Screw length to diameter ratio | 20.0:1.0 | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |