| About |
|---|
| Rilsan® BMNO TLD resin is a polyamide produced from a renewable source. This natural grade is designed for injection molding. This grade is also available in black as Rilsan® BMN BLACK TLD resin&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PA 11 |
| Material Status | Commercial: Active |
| Features | Renewable resources |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.03 | g/cm³ | ISO 1183 |
| Shrinkage rate | Internal Method | ||
| TD：30℃，2.0 mm，24 hrs | 0.80 | % | |
| MD：30℃，2.0 mm，24 hrs | 0.40 | % | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30℃ | 4.0 | kJ/m² | |
| 23℃ | 9.0 | kJ/m² | |
| Charpy Unnotch Impact strength | ISO 179 | ||
| -30℃ | 无断裂 | ||
| 23℃ | 无断裂 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 189 | ℃ | ISO 11357-3 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| ISO Shortname | PA11, MHLR, 12-010 | ISO 1874 | |
| Renewable Carbon Conent | > 97 | % | ASTM D6866 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ISO 868 | ||
| Shaw’s D | 75 | ||
| Shore D, 15 seconds | 68 | ||
| Tensile modulus | 1320 | MPa | ISO 527-2 |
| tensile strength | ISO 527-2 | ||
| yield | 41.0 | MPa | |
| fracture | 58.0 | MPa | |
| Tensile strain | ISO 527-2 | ||
| yield | 5.0 | % | |
| fracture | > 200 | % | |
| Bending modulus | 1140 | MPa | ISO 178 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80.0 to 90.0 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Processing (melt) temperature | 210 to 280 | °C | |
| Mold temperature | 20.0 to 60.0 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |