| About |
|---|
| Rilsan® Tieflex R463 NAT TL resin is a polyamide produced from a renewable source. This grade is plasticized and specially designed for pneumatic application. It combines very high flexibility with good impact resistance.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PA Not specified |
| Material Status | Commercial: Negative |
| Features | High impact resistance,Renewable resources,High Flexibility |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 235℃，5 kg | 6.00 | cm³/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃ | — | kJ/m² | ISO 179/1eA |
| 23℃ | — | ISO 179/1eA | |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -30℃ | — | ISO 179/1eU | |
| 23℃ | — | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 214 | ℃ | ISO 11357-3 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 15 seconds | 60 | ISO 868 | |
| Tensile modulus | — | MPa | ISO 527-2 |
| tensile strength | |||
| yield | — | MPa | ISO 527-2 |
| Tensile strain | |||
| yield | — | % | ISO 527-2 |
| Nominal tensile fracture strain | — | % | ISO 527-2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |