| About |
|---|
| Rilsan® Tieflex R463 NAT TL resin is a polyamide produced from a renewable source. This grade is plasticized and specially designed for pneumatic application. It combines very high flexibility with good impact resistance.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PA Not specified |
| Material Status | Commercial: Active |
| Features | High impact resistance,Renewable resources,High Flexibility,Plasticizing |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | |
| Melt Volume Rate | |||
| 235℃，5 kg | 6.00 | cm³/10min | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -30℃ | — | kJ/m² | |
| 23℃ | — | ||
| Charpy Unnotch Impact strength | |||
| -30℃ | — |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 214 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 15 seconds | 60 | ||
| Tensile modulus | — | MPa | |
| tensile strength | |||
| yield | — | MPa | |
| Tensile strain | |||
| yield | — | % | |
| Nominal tensile fracture strain | — | % |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |