| About |
|---|
| Rilsan® Tieflex R473 NAT TL resin is a flexible and partially bio based tie layer alloy. This grade is designed for air brake application.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PA Not specified |
| Material Status | Commercial: Active |
| Features | Good flexibility,Renewable resources |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.10 | g/cm³ | |
| Melt Volume Rate | |||
| 235℃，5 kg | 5.00 | cm³/10min | |
| Water absorption rate | |||
| Saturation, 23 ℃ | 6.7 | % | |
| Equilibrium, 23 ℃, 50% RH | 2.1 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 50% strain | — | MPa | |
| Tensile strain | |||
| fracture | — | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -30℃ | — | kJ/m² | |
| 23℃ | — | kJ/m² | |
| Charpy Unnotch Impact strength | |||
| -30℃ | — | ||
| 23℃ | — |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 215 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |