| About |
|---|
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PA Copolymer |
| Material Status | Commercial: Negative |
| Features | Renewable resources |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.7 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.80 | % | ISO 62 |
| Shrinkage rate | |||
| MD：24hrs，2mm，80℃ | 0.17 | % | Internal Method |
| TD：24hrs，2mm，80℃ | 0.59 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 200 | MPa | ISO 527 |
| Tensile modulus | 18000 | MPa | ISO 527 |
| Tensile strain | |||
| fracture | 3.2 | % | ISO 527 |
| Bending modulus | 17000 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 23℃ | >70 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 197 | ℃ | ISO 11357 |
| Process Conditions | |||
|---|---|---|---|
| Processing technology | Nominal value | Unit | Test method |
| Melt Temperature | |||
| minimum | 240 | ℃ | |
| secondary | 260 | ℃ | |
| maximum | 290 | ℃ | |
| Mold temperature | 30-80 | ||
| desiccation | |||
| time | 3-4 | hrs | |
| temperature | 80-90 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |