RONFALIN® TXE35

About
RONFALIN® TXE35 is an Acrylonitrile Butadiene Styrene (ABS) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion. Important attributes of RONFALIN® TXE35 are: Flame Rated RoHS Compliant Typical application of RONFALIN® TXE35: Automotive&&

Product Description
Supplier	A. Schulman
Generic	ABS
Material Status	Commercial: Active
Features	HB
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ISO 1183
Melt Flow Rate
220℃，10.0kg	4.0	g/10min	ISO 1133
Shrinkage rate	0.40 to 0.60	%

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	40	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	95.0	℃	ISO 75-2/A
0.45 MPa, unannealed	96.0	℃	ISO 75-2/B
Vicat Softening Temp
B50	99.0	℃	ISO 306

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+16	ohms	IEC 60093
Dielectric strength	> 26	kV/mm	IEC 60243-1
Compared to the leakage tracing index
Solution A	> 600	V	IEC 60112

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	42.0	MPa	ISO 527-2/50
Bending modulus	2100	MPa	ISO 178
Ball hardness	77.0	MPa	ISO 2039-1

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.