| About |
|---|
| Hexene Copolymer Linear Medium Density Polyethylene with UV8 for foaming applications. It is specially formulated for inner layers with excellent foam cell structure and smooth surface finish. It increases thickness, durability and resistance to stiffness of molded part. Available as white powder compound. Applications: High quality Polyethylene to produce integrated interior structural foam walls with smooth surface finish. This product meets all requirements of US food and drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.&& |
| Product Description | |
|---|---|
| Generic | LMDPE |
| Material Status | Commercial: Negative |
| Features | Weather resistance is good,Foaming performance,Food contact compliance,Low odor,Copolymer,Hexene copolymers |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Foam treatment |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.321 | g/cm³ | |
| Apparent density | 0.33 to 0.39 | g/cm³ | ASTM D1895 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 5.2 | g/10min | ASTM D1238 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Pourability | 1500.00 to 2400.00 | g/10 min | ASTM D1895 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Foamed |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |