| About |
|---|
| Rotuba CA MS is a Cellulose Acetate (CA) product. It can be processed by injection molding and is available in North America. Applications of Rotuba CA MS include consumer goods, medical/healthcare and tools. Primary characteristic: eco-friendly/green.&& |
| Product Description | |
|---|---|
| Generic | CA |
| Material Status | Commercial: Active |
| Features | Renewable resources,Good color stability,Good stability |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.26 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 2.4 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -40℃ | 69 | J/m | ASTM D256 |
| 23℃ | 330 | J/m | ASTM D256 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 40 | ASTM D785 | |
| tensile strength | ASTM D638 | ||
| yield | 20.0 | MPa | ASTM D638 |
| fracture | 29.0 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 51 | % | ASTM D638 |
| Bending modulus | 862 | MPa | ASTM D790 |
| bending strength | |||
| yield | 27.9 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 66 to 77 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Barrel rear temperature | 171 to 182 | °C | |
| Barrel middle temperature | 171 to 182 | °C | |
| Barrel front temperature | 171 to 182 | °C | |
| Nozzle temperature | 182 to 193 | °C | |
| Mold temperature | 43 to 54 | °C | |
| Injection pressure | 6.89 to 8.27 | MPa | |
| Back pressure | 0.00 to 0.345 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |