| About |
|---|
| Product Description | |
|---|---|
| Supplier | Kotec |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile Strength | |||
| Broken BRK | 148 | MPa | ASTM D638 |
| Flexural Strength | 200 | MPa | ASTM D790 |
| Flexural Modulus | 10200 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 121 | ||
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | ＞260 | ℃ | ASTM D648 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume Resistance | 1.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Constant | |||
| 1 MHz | 4 | ASTM D150 | |
| Insulation Strength | 16 | MV/m | ASTM D149 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.67 | ASTM D792 | |
| Water Absorption | |||
| 23℃，24hr | 0.02 | % | ASTM D570 |
| Molding shrinkage | |||
| MD | 0.25 | % | |
| TD | 1.1 | % | ASTM D995 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | |||
| 0.75mm | V-0 | UL 94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | |||
| 23℃，3.2mm | 60 | J/m | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |