RT406 - SOLIAO

About

Product Description
Generic	热塑性聚酯
Material Status	Commercial: Active
Features	High impact resistance

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.9	g/cm³	ISO 1183
Melt Flow Rate	40	g/10min	ISO1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness	45	HD	ISO 868
tensile strength	18	MPa	ISO 527
Tensile strain
fracture	800	%	ISO 527
bending strength	8	MPa	ISO 178
Bending modulus	220	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	No break		ISO 180

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.