RTP 1500-40D TFE 15 SI

About
Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&&

Product Description
Generic	TPU-酯
Material Status	Commercial: Negative
Features	Good Rigidity,Good Dimensional Stability,Lubricating,HB
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.24	g/cm³	ASTM D792
Shrinkage rate
MD：3.2 mm	0.50	%	ASTM D955
Water absorption rate
23℃，24hr	0.60	%	ASTM D570

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	54.0	℃	ASTM D648

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+16	ohms·cm	ASTM D257

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	40		ASTM D2240
tensile strength
yield	28.0	MPa	ASTM D638
Tensile strain
fracture	400	%	ASTM D638

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	188 to 216	°C
Barrel middle temperature	188 to 216	°C
Barrel front temperature	188 to 216	°C
Mold temperature	21 to 38	°C
Injection pressure	68.9 to 103	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.