| About |
|---|
| ESD Protection Electrically Conductive&& |
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Conductive,Electrostatic discharge protection |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.980 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | > 5.0 | g/10min | ISO 1133 |
| Shrinkage rate | |||
| MD：4.0 mm | 1.0 to 2.0 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1350 | MPa | ISO 527-2 |
| tensile strength | 22.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | > 10 | % | ISO 527-2 |
| Bending modulus | 1150 | MPa | ISO 178 |
| bending strength | 25.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 35 | kJ/m² | ISO 180-1A |
| Notched impact strength of cantilever beam | 无断裂 | ISO 180/1U |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | |||
| — | < 1.0E+6 | ohms | IEC 60093 |
| — | < 1.0E+5 | ohms | ESD STM11.11 |
| Volume resistivity | < 1.0E+3 | ohms·cm | IEC 60093 |
| Electrostatic attenuation | < 2.0 | sec | FTMS 101C 4046.1 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 2.0 | hr | |
| Processing (melt) temperature | 190 to 230 | °C | |
| Mold temperature | 30 to 65 | °C | |
| Injection pressure | 70.0 to 105 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 4 mm thickness |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |