| About |
|---|
| Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& |
| Product Description | |
|---|---|
| Generic | PPA |
| Material Status | Commercial: Negative |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.33 | g/cm³ | ISO 1183 |
| water content | 0.050 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| injection molding | 33000 | MPa | ISO 527-2 |
| tensile strength | 345 | MPa | ISO 527-2 |
| Tensile strain | |||
| Yield, injection molding | 1.8 | % | ISO 527-2 |
| Bending modulus | |||
| injection molding | 25500 | MPa | ISO 178 |
| bending strength | |||
| injection molding | 515 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| Injection molding | 8.0 | kJ/m² | ISO 180-1A |
| Notched impact strength of cantilever beam | |||
| Injection molding | 80 | kJ/m² | ISO 180/1U |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Primary Additive | 30 | % |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature – hot air dryer | 105 | °C | |
| Drying time – hot air dryer | 4.0 to 6.0 | hr | |
| Dew Point | -30 | °C | |
| Processing (melt) temperature | 300 to 330 | °C | |
| Mold temperature | 135 to 160 | °C | |
| Injection pressure | 70.0 to 125 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 4mm thickness |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |