RTP 4605 TFE 10 FR

About
Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&&

Product Description
Generic	Syndiotactic Polystyrene
Material Status	Commercial: Negative
Features	Flame Characteristics,Lubricating,Good wear resistance,V-0
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.50	g/cm³	ASTM D792
Shrinkage rate
MD：3.2 mm	0.30	%	ASTM D955
Water absorption rate
23℃，24hr	0.010	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	9650	MPa	ASTM D638
tensile strength	115	MPa	ASTM D638
Tensile strain
fracture	1.5	%	ASTM D638
Bending modulus	9650	MPa	ASTM D790
bending strength	159	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	96	J/m	ASTM D256
Notched impact strength of cantilever beam
3.2 mm	450	J/m	ASTM D4812

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	V-0		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	277 to 327	°C
Barrel middle temperature	277 to 327	°C
Barrel front temperature	277 to 327	°C
Mold temperature	66 to 149	°C
Injection pressure	34.5 to 103	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.