RTV-2 XT-153 - SOLIAO

About
XT-153 is a two component condensation cure silicone rubber mold making material. It differs from most silicone rubber materials in that it is translucent rather than opaque. In thin sections, it is nearly transparent. It has been designed with a low viscosity to enable it to reproduce intricate detail and a very low durometer that allows maximum flexibility. It can also be easily colored by the addition of appropriate pigments. This unique combination of properties makes XT-153 well-suited for the special effects and movie making industries.&&

About

XT-153 is a two component condensation cure silicone rubber mold making material. It differs from most silicone rubber materials in that it is translucent rather than opaque. In thin sections, it is nearly transparent. It has been designed with a low viscosity to enable it to reproduce intricate detail and a very low durometer that allows maximum flexibility. It can also be easily colored by the addition of appropriate pigments. This unique combination of properties makes XT-153 well-suited for the special effects and movie making industries.&&

Product Description
Generic	硅橡胶,RTV-2
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.06	g/cm³
Shrinkage rate
Cured	0.10	%

Uncured Properties	Nominal value	Unit
colour
—	Translucent
—	Translucent
viscosity
—	0.30 to 0.40	Pa·s
—	20 to 30	Pa·s
Curing time	18 to 24	hr
storage stability	60 to 120	min

Cured Properties	Nominal value	Unit
Shore hardness
Shaw’s A	2 to 4
Shaw’s A	5 to 8
tensile strength	1.34 to 1.69	MPa
Tensile strain
fracture	450 to 500	%
tear strength	7.01 to 10.5	kN/m

Notes
1. Typical properties: these are not to be construed as specifications.
2. Cured
3. Activator
4. Base
5. 1 Day
6. 7 Days
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.