Rubber Glass® Rubber Glass

About
Rubber Glass® is a platinum-catalyzed silicone rubber product developed specifically for special effects and display applications. Two liquids (1 Part A + 1 Part B) are mixed together and poured into a container. The mixture cures overnight to a solid water clear rubber that can then be easily broken or “crumbled” into pieces that look exactly like broken glass, ice or diamonds. Vibrant colors are possible by adding Silc-Pig® liquid color pigments. Rubber Glass® can be used to create a variety of special effects (i.e. simulated broken glass where human contact is required) and model effects (i.e. simulated ice or water). It can also be used for electronic encapsulation applications.&&

About

Rubber Glass® is a platinum-catalyzed silicone rubber product developed specifically for special effects and display applications. Two liquids (1 Part A + 1 Part B) are mixed together and poured into a container. The mixture cures overnight to a solid water clear rubber that can then be easily broken or “crumbled” into pieces that look exactly like broken glass, ice or diamonds. Vibrant colors are possible by adding Silc-Pig® liquid color pigments. Rubber Glass® can be used to create a variety of special effects (i.e. simulated broken glass where human contact is required) and model effects (i.e. simulated ice or water). It can also be used for electronic encapsulation applications.&&

Product Description
Generic	硅酮
Material Status	Commercial: Active
Features	Good coloring
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	casting

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Specific volume	1.03	cm³/g
Shrinkage rate
MD	< 0.10	%	ASTM D2566

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	33		ASTM D2240

Electrical performance	Nominal value	Unit	Test method
Dielectric strength	13	kV/mm	ASTM D149
Dielectric constant
100 Hz	3.17		ASTM D150

THERMAL	Nominal value	Unit	Test method
storage stability
23℃	120	min	ASTM D1475
Thermosetting mixed viscosity	150	cP	ASTM D2393
stripping time
23℃	960	min

Supplementary information	Nominal value	Unit	Test method
Mixing ratio	1A:1B by volume or weight

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.