About |
---|
Rulon® AR is somewhat more flexible than Rulon® LR, hence suitable for seals and bonded coating of slide surfaces. It has many decades of use in automotive shaft seals and fuel metering pump cups. Rulon AR has a practically universal chemical inertness like that of Rulon LR and provides long life and reliability in continuous non-lubricated service. It is capable of operating at PV values up to approximately 10,000. Higher PV values are possible for intermittent use applications.&& |
Product Description | |
---|---|
Supplier | Saint Gobain |
Generic | PTFE |
Material Status | Commercial: Active |
Features | Solvent resistance |
Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 2.21 | g/cm³ | ASTM D792 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
tensile strength | 13.8 | MPa | ASTM D4894 |
Tensile strain | |||
fracture | 180 | % | ASTM D4894 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |