About |
---|
SABIC®COHERE™8380是通过使用茂金属催化剂的溶液聚合制备的乙烯 – 辛烯共聚物。 它 可用于单层或共挤塑膜,以提高热封性能,透明度,韧性,柔韧性和弹性。 它有 严格的凝胶控制,以满足高品质配方的要求。 |
Product Description | |
---|---|
Supplier | SABIC |
Generic | POP |
Material Status | Commercial: Active |
Features | High elastic,Good Hermeticity |
Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Melt Flow Rate | |||
190℃,2.16kg | 3.0 | g/10min | ASTM D1238 |
Density | |||
23℃ | 0.880 | g/cm³ | ASTM D792 |
tensile property | Nominal value | Unit | Test method |
---|---|---|---|
Pressure breakthrough | 11.8 | MPa | ASTM D638 |
100% modulus | 3.3 | MPa | ASTM D638 |
tear strength | |||
C-type | 41.2 | kN/m | ASTM D624 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
melting point | ~68 | ℃ | SABIC method |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Bending modulus | |||
1% secant | 19.6 | MPa | ASTM D790 |
Tensile strain | |||
fracture | 900 | % | ASTM D638 |
Notes |
---|
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |