| About |
|---|
| SABICFORTIFYC3080D是一种乙烯辛烯共聚物，采用茂金属催化剂溶液聚合制得。该产品以自由流动的颗粒形式呈现。 SABICFORTIFYC3080D是一种高性能共聚物改性剂，具有优异的韧性，柔软性和光学性能。它也提供了优异的流动性。 其典型应用是热塑性烯烃化合物，鞋底和电线和电缆挤出中的抗冲改性剂。请注意具体的储存和处理条件。本产品不适用于任何制药/医疗应用，也不得用于任何药品/医疗应用。 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polyolefin Elastomer |
| Material Status | Commercial: Negative |
| Features | Good flexibility,Good liquidity,Optical performance,Octene copolymer,Copolymer,Soft |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.880 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 3.0 | g/10min | ASTM D1238 |
| Mooney viscosity (ML 1+4121 ℃) | 11 | MU | ASTM D1646 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 41.2 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -49.0 | ℃ | Internal Method |
| Melting temperature | 68.0 | ℃ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore A, 1 second | 78 | ASTM D2240 | |
| Shore D, 1 second | 24 | ASTM D2240 | |
| Tensile modulus | |||
| 100% secant | 3.30 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 11.8 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 900 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 19.6 | MPa | ASTM D790 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |