| About |
|---|
| B4660等级是中等分子量的高密度聚乙烯均聚物，用于吹塑应用。 他们是 主要用于赋予高刚性，韧性和良好的加工性能。 这些独特的属性提供了可能性 减轻重量在非常好的顶部载荷强度。 B4660：适用于乳制品和果汁包装 典型应用 B4660系列树脂主要用于食品和饮料行业的吹塑瓶。 B4660AB等级 特别推荐用于水包装应用。 等级是为了满足客户的要求 的纯洁，健康和感官。 它们也可以用于其他中空的薄壁部件和型材挤压件中。 他们是 不推荐用于包装环保活性物质如肥皂，洗涤剂，洗发水等 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Soft |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.7 | g/10min | ASTM D1238 |
| 190℃，5.0kg | 2.8 | g/10min | ASTM D1238 |
| 190℃，21.6kg | 46 | g/10min | ASTM D1238 |
| Density | 0.961 | g/cm³ | ASTM D1505 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 66 | ASTM D2240 | |
| 1% secant modulus | > 1000 | MPa | ASTM D638 |
| yield strength | 30 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 18 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 500 | % | ASTM D638 |
| Bending strength | 28 | MPa | ASTM D790 |
| Bending modulus | 1100 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 127 | ℃ | ASTM D1525 |
| Embrittlement temperature | < -75 | ℃ | ASTM D746 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | 150 | J/m | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |