| About |
|---|
| SABIC®HDPE F00952树脂是经过设计的高分子量高密度聚乙烯共聚物 专门用于吹塑薄膜挤出。 它具有广泛的分子分布和高密度结合成功的优秀 具有高膜强度和刚性的可挤压性。 该材料含有抗氧化剂。SABIC®HDPE F00952树脂推荐用于吹塑薄膜挤出。 建议用于制造高强度杂货袋，购物袋和高质量薄膜用于多壁袋衬垫和替代薄纸产品。 加工条件SABIC®HDPE F00952E可以在常规HMW-HDPE设备上挤出，熔体温度在200°C至235°C之间。15μm吹塑薄膜上测量了薄膜特性 BUR = 4。 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Inoxidizability |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.05 | g/10min | ISO 1133 |
| 190℃，21.6 kg | 10 | g/10min | ISO 1133 |
| Density | 9.52 | g/cm³ | ASTM D1505 |
| Film properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Dart Impact F50 | 180 | g | ASTM D1709 |
| tear strength | |||
| TD | 60 | g/µm | ASTM D1922 |
| MD | 12 | g/µm | ASTM D1922 |
| Fracture strain | |||
| TD | 550 | % | ASTM D882 |
| MD | 400 | % | ASTM D882 |
| Fracture stress | |||
| TD | 60 | MPa | ASTM D882 |
| MD | 56 | MPa | ASTM D882 |
| Elastic modulus | |||
| TD | 1500 | MPa | ASTM D882 |
| MD | 1250 | MPa | ASTM D882 |
| Yield stress | |||
| TD | 31 | MPa | ASTM D882 |
| MD | 33 | MPa | ASTM D882 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 125 | ℃ | ASTM D1525 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |