| About |
|---|
| SABIC® HDPE F00952J resin is a high molecular weight, high density polyethylene copolymer. The design of the product, molecular architecture and density, gives F00952J a good combination of easy extrusion and high melt strength with strong physical properties. Typical applications are thin films with excellent strength and rigidity. The material contains anti-oxidants. Typical applications SABIC® HDPE F00952J resin is typically used for blown film extrusion and production of high strength grocery sacks, shopping bags and high quality thin films for multi wall sack liners and replacement for thin paper products. This product is not intended for and must not be used in any pharmaceutical/medical applications.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | HMW-HDPE |
| Material Status | Commercial: Active |
| Features | Block Copolymer,Inoxidizability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.952 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，2.16kg | 0.050 | g/10min | ISO 1133 |
| 190℃，21.6kg | 9.5 | g/10min | ISO 1133 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 15 | µm | |
| Elastic modulus | |||
| TD, 15 µ m, blow molded film | 1500 | MPa | ASTM D882 |
| MD, 15 µ m, blow molded film | 1250 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, yield, 15 µ m, blow molded film | 33.0 | MPa | ASTM D882 |
| TD, yield, 15 µ m, blow molded film | 40.0 | MPa | ASTM D882 |
| MD, fracture, 15 µ m, blow molded film | 66.0 | MPa | ASTM D882 |
| TD, fracture, 15 µ m, blow molded film | 64.0 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 15 µ m, blow molded film | 400 | % | ASTM D882 |
| TD, fracture, 15 µ m, blow molded film | 550 | % | ASTM D882 |
| Drop hammer impact | |||
| 15 µ m, blow molded film | 180 | g | ASTM D1709 |
| Elmandorf tear strength | ASTM D1922 | ||
| MD: 15 µ m, blow molded film | 12 | g | ASTM D1922 |
| TD: 15 µ m, blow molded film | 60 | g | ASTM D1922 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 125 | ℃ | ASTM D1525 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 200 to 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. F50 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |