SABIC® HDPE M40060

About
M40060 is High Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good rigidity, excellent toughness and low warp age.

Product Description
Supplier	SABIC
Generic	HDPE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	4.0	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
10% non-ionic detergent, F50	3.00	hr
100% non-ionic detergent, molded, F50	6.00	hr

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam	180	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -75.0	℃	ASTM D746
Vicat Softening Temp	125	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	60		ASTM D2240
Tensile modulus
1% cut, injection molding	950	MPa	ASTM D638
Tensile strength
yield	24.0	MPa
fracture	22.0	MPa
Tensile strain
fracture	> 600	%	ASTM D638
Bending modulus	900	MPa	ISO 178
bending strength	24.0	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.