| About |
|---|
| Provisional Data Sheet P5510N is a grade, which has a high density (class MRS 8 – PE 80) and a bimodal distribution of the molecular mass. An universal grade for pipe extrusion which, due to a keen combination of properties. It can be used for telecommunication, corrugated and spiral pipes. P5510N is a natural High Density Polyethylene (HDPE) resin specifcally designed for Pipe Extrusion. It provides excellent stress crack resistance properties (ESCR) combined with very good long term hydrostatic strength.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Food contact compliance,Bimodal molecular weight distribution,High ESCR |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.944 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，21.6kg | 10 | g/10min | ISO 1133 |
| 190℃，5.0kg | 0.43 | g/10min | ISO 1133 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 23 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -80.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 67.0 | ℃ | ISO 306 |
| Oxygen sensing time | |||
| 210℃ | > 20 | min | EN 728 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 61 | ISO 868 | |
| Tensile modulus | |||
| 2 mm, molded into shape | 850 | MPa | ISO 527-2/1BA/50 |
| tensile strength | |||
| Yield, 2 mm, molded | 22.0 | MPa | ISO 527-2/1BA/50 |
| Tensile strain | |||
| Yield, 2 mm, molded | 10 | % | ISO 527-2/1BA/50 |
| Bending creep modulus | |||
| 4 point，1 minvalue | 1.00 | GPa | DIN 19537-2 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 190 to 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |