| About |
|---|
| P6006AD is black compound high density polyethylene (classified as PE112) specially designed for pressure pipe applications. It delivers exceptional processing performance. |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.959 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 6.4 | g/10min | |
| 190℃，5.0kg | 0.23 | g/10min | |
| Carbon black content | 2.3 | % | ISO 6964 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 2 mm | 900 | MPa | ASTM D638 |
| Tensile strength (yield, 2.00 mm) | 23.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 2 mm | > 350 | % | ISO 527-2/1BA/50 |
| Tensile Creep Modulus – 100h | 360 | MPa | ISO 527 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23 ℃, molded | 26 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Oxygen induction time (210 ° C) | > 30 | min | EN 728 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |