SABIC® HDPE PCG300054

About
SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® HDPE PCG300054 is a high density polyethylene copolymer injection moulding grade. Its narrow molecular weight distribution and high flow results in low warpage, good rigidity, excellent gloss and fast moulding cycles. SABIC® HDPE PCG300054 is recommended for healthcare packaging applications like, syringes, caps and closures, thin wall articles and other parts for medical devices. SABIC® HDPE PCG300054 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body.&&

About

SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® HDPE PCG300054 is a high density polyethylene copolymer injection moulding grade. Its narrow molecular weight distribution and high flow results in low warpage, good rigidity, excellent gloss and fast moulding cycles. SABIC® HDPE PCG300054 is recommended for healthcare packaging applications like, syringes, caps and closures, thin wall articles and other parts for medical devices. SABIC® HDPE PCG300054 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body.&&

Product Description
Supplier	SABIC
Generic	HDPE copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Low warping,High purity,Good surface appearance,High liquidity,Quick molding cycle,Weight distribution,Copolymer
Availabilitys	North America,Latin America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.954	g/cm³	ISO 1183
Melt Flow Rate			ISO 1133
190℃，2.16kg	30	g/10min	ISO 1133
190℃，5.0kg	80	g/10min	ISO 1133
Melt Volume Rate			ISO 1133
190℃，2.16 kg	40.0	cm³/10min	ISO 1133
190℃，5 kg	105	cm³/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180/A
-30 ℃, molded	3.0	kJ/m²	ISO 180-A
23 ℃, molded	3.0	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	82.0	℃	ISO 75-2/B
Vicat Softening Temp	125	℃	ISO 306/A
Melting temperature
DSC	132	℃	DIN 53765
Enthalpy Change	205	J/g	DIN 53765

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, molded	61		ISO 868
Tensile modulus
2 mm, molded into shape	1100	MPa	ISO 527-2/1BA/50
tensile strength			ISO 527-2/1BA/50
Yield, 2 mm, molded	26.0	MPa	ISO 527-2/1BA/50
Fracture, 2 mm, molded	24.0	MPa	ISO 527-2/1BA/50
Tensile strain
Fracture, 2 mm, molded	> 200	%	ISO 527-2/1BA/50
Tensile creep modulus			ISO 899-1
1 hr	500	MPa	ISO 899-1
1000 hr	225	MPa	ISO 899-1

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.