SABIC® LDPE 2404N0

About
SABIC® LDPE 2404N0 is a LDPE tubular grade without additives. The product is typically developed for cast film extrusion applications requiring an optimal relationship between draw down, purity and organoleptic properties. Application SABIC® LDPE 2404N0 is typically suitable for a wide variety of cast film application. This product is not intended for and must not be used in any pharmaceutical/medical applications.&&

About

SABIC® LDPE 2404N0 is a LDPE tubular grade without additives. The product is typically developed for cast film extrusion applications requiring an optimal relationship between draw down, purity and organoleptic properties. Application SABIC® LDPE 2404N0 is typically suitable for a wide variety of cast film application. This product is not intended for and must not be used in any pharmaceutical/medical applications.&&

Product Description
Supplier	SABIC
Generic	LDPE
Material Status	Commercial: Active
Features	High purity,Good dissection,Good sensory characteristics.,Low density
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.925	g/cm³	ISO 1183/A
Melt Flow Rate
190℃，2.16kg	4.2	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
1.10 mm, molded	250	MPa	ISO 527-2/50
tensile strength
Fracture, 1.10 mm, molded	12.0	MPa	ISO 527-2/50
Tensile strain			ISO 527-2/50
Yield, 1.10 mm, molded	11	%
Fracture, 1.10 mm, molded	800	%

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	94.0	℃	ISO 306/A
Melting temperature
DSC	111	℃	Internal Method
Enthalpy Change	134	J/g	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.