| About |
|---|
| HP2022JN是适用于通用包装的低密度聚乙烯牌号。 它们表现出更好的拉伸，良好的光学和机械性能。 HP2022JN含滑爽和防粘添加剂。薄收缩膜，复膜，制袋，纺织品包装，软质商品包装，通用袋包装用 光学和T恤手提袋。 |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Good Tensile Strength |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ASTM D1238 |
| Density | 0.922 | g/cm³ | ASTM D1505 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of falling darts | 2 | g/µm | ASTM D1709 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 10 | % | ASTM D1003 |
| gloss | |||
| 45° | 55 | ASTM D2457 |
| Film properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Fracture stress | |||
| MD | 29 | MPa | ASTM D882 |
| TD | 15 | MPa | ASTM D882 |
| Fracture strain | |||
| MD | 120 | % | ASTM D882 |
| TD | 530 | % | ASTM D882 |
| Tensile strain | |||
| yield | |||
| MD | 11 | MPa | ASTM D882 |
| TD | 11 | MPa | ASTM D882 |
| 1% positive modulus | |||
| MD | 180 | MPa | ASTM D882 |
| TD | 230 | MPa | ASTM D882 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |